PrepExams Blog

Exam Simulator for A+ Core 2 consists of 325+ questions with Flash cards. The tests are offered in two modes. A. Online version, and b. Downloadable version. In the online version, a user need to take the tests online after logging in to the website (Internet connectivity is required). In the download version, a user may download the examsim, and take the test on his/her desktop computer.

Exam Objectives Covered include

1.0 Operating Systems 27%
2.0 Security 24%
3.0 Software Troubleshooting 26%
4.0 Operational Procedures 23%
Total 100%

Please download the application from here

A+ Core 2 Exam Sim

Exam Simulator for Security+ consists of 350+ questions with Flash cards.

Exam Objectives Covered include

1.0 Attacks, Threats, and Vulnerabilities 24%
2.0 Architecture and Design 21%
3.0 Implementation 25%
4.0 Operations and Incident Response 16%
5.0 Governance, Risk, and Compliance 14%
Total 100%

Certexams.com Practice tests for Security+ SY0-601 are available from

Security+ Exam Sim

Please refer Security+ Exam Study Guide on

Security+ Exam Cram

Juniper Jweb is a GUI based tool for simplifying Juniper router configurations. It is possible to configure juniper devices using Jweb GUI for some routine setup tasks. However, for complex configurations, you will need to use Juniper CLI. Juniper JUNOS supports Jweb for most devices.

Certexams.com updated its Juniper Network simulator to include both Console and GUI based labs. Juniper GUI simulates Juniper Jweb(T), enabling users to configure and troubleshoot a network using self explanatory navigation pane

Screen-shot of the Juniper Network Simulator main navigation panel.

Various navigation buttons of Juniper simulator GUI is explained below.

1. Configure: By clicking this option various options(features) of the devices are listed in the left navigation pane select any of these feature to configure the device.

2. Monitor: By clicking this option displays various features on the left pane you can select these option to view your configuration.

3.Troubleshoot: This option will take you to CLI terminal mode also allows you to troubleshoot the lab by using ping , traceroute command. 

4. Maintain: Use this option save and load the configurations and also to opening a file that was created using Network Designer module.

5. N/w Diagram: A window where default network diagram of the lab exercise is displayed and the device configuration details.

To know more about the features of Juniper Network Simulator for Console and GUI, visit here

https://routersimulator.certexams.com/juniper-sim/index.html

You can also view the available juniper simulator labs

Exam Simulator for CCNP ENARSI consists of 200+ Questions conforming to the latest exam objectives. The question types include Multiple Choice, Drag-and-Drop, True/False, and Testlets.

Please visit here to download Exam Simulator for CCNP ENARSI

Content engine which is included in author can be used to create lessons and arrange them in levels (like subject, topic, chapters), it allows entering remote URL, text, html, pdf, image, video, audio, multimedia, docx, excel, and ppt files.

some of the screenshots of the content engine

Also checkout related blog with more info on the LAAS software:

AnandSoft Releases Learning and Assessment Software for eLearning – AnandSoft Blog

Trial version of the software may be downloaded here
LAAS Software

Exam Simulator for CCNP ENCOR consists of 200+ Questions conforming to the latest exam objectives. The question types include Multiple Choice, Drag-and-Drop, True/False, and Testlets.

This exam is associated with following certifications CCNP Enterprise, CCIE Enterprise Infrastructure, CCIE Enterprise Wireless, Cisco Certified Specialist – Enterprise Core

some screenshots of Exam simulators

Check out this for downloading CCNP ENCOR Exam Simulator

Network Simulator for CCNA provides advanced router/switch network simulator functionalities including VLANs, VTP, interVLAn communications, RIP v2, OSPF, and WAN protocol simulation.

CCNA Network Simulator Features:

• Lab exercises -currently 100+ labs are included with scenario type labs for NAT, OSPF, BGP, EIGRP, Access Lists, and others.
• Router and switch IOS simulator. For beginners, a simple router/switch device simulator has been provided.
• Simulate Cisco® IOS routers and Switches, supports  26XX, and 36XX routers, and 19XX, and 29XX switches.
• 350+ router/switch commands are supported for thorough preparation.
• Labs for switches including 19xx and 29xx switches included in the Lab Manual provided with the software.
• Contextual help files that provide step by step instructions on using the simulator have been provided.
• The demo version is limited to a fewer labs, and up to global configuration mode is supported in demo version.

Recently CCNA Network Simulator is updated with adding few more features

• Backup and restore Lab configuration
• Bookmarking individual Labs.
• Bookmarking all labs under selected section.
• Saving and reloading half completed labs
• Resetting individual and all labs to default.
• Marking not attempted, not completed and completed labs in different color for easy identification.

added labs on JSON simulator, wireless simulator.

some of the screenshots of the Network simulator is shown below

WLC Simulator

Download the free demo version here:

Exam Simulator with NetSim for CCNA

Other products available include:   Juniper Netsim, Comptia A+ Labs, and CCNA tests.

Anand Software and Training, an eLearning solutions provider, updated it’s flagship product Learning and Assessment Software recently. The update enables detailed pass criteria and granular scoring system. The main features available with the “First of it’s kind” software are:

Author engine – that enables authors to write questions, answers, and explanations and provide categories and sub categories. Please check this link for more information on features available:

Author Module Features

Exam engine– This is the most comprehensive engine available to date. It enables authors or super users with complete control of exam environment, right from which navigation buttons are available to candidates, whether remote proctoring should be enables, etc. Please check this link for more information are available options.
Exam Module Features

Content engine – This is an innovative and comprehensive module that enables authors to develop and distribute content. Most of the available content formats are supported including pdfs, audio visuals, MS office formats, and others. Please check this link for more information.

Content Engine features

The trial version may be downloaded here:

Also checkout related blog with more info on the LAAS software:

AnandSoft Releases Learning and Assessment Software for eLearning – AnandSoft Blog

About Anand Software and Training: The company is involved in software development, web design and apps development. The LAAS software is copyright of Anand Software and Training.

Also check out, Anand Software and Training Releases Learning and Assessment Software –simexams.com for related information.

Network+ exam simulator provides 500+ practice questions from latest syllabus of Network+ certification exam N10-008. Complete explanation is provided for each question in Learn mode, and actual exam environment is simulated in Exam mode. Options to save the results and reviewing questions are provided.

Question types supported are

1. Multiple choice single answer
2. Multiple choice multiple answer
3. Text Drag and drop
4. Exhibit type
5. Image Drag and drop

Download link for the app is

Network+ Exam sim Android app

Sim-Ex Cram Notes for CCNA 200-301 which are intended to help you pass the CCNA exam, providing wide coverage of CCNA topics in detail to enable you to understand the concepts.

The cram notes contains the study material in detail according to latest exam objectives.

Please check out this for CCNA Exam Cram

Also check this for A+ Core 1 Exam Cram and A+ Core 2 exam Cram